Download Print this page

Pc Connection Mode; Note In Using - Samsung Digimax 210 SE User Manual

Advertisement

-Digimax210SE(48~71) 00.10.24 8:34 AM D‰¿Ã¡ˆ66

PC CONNECTION MODE

Function of PC connection mode
1
Downloading your images.
°§Once you have downloaded your images to the hard disk, you can then
edit and print them.
(1) Connect your camera to a computer by using the USB or RS-232C
cable.
(2) Download the image editing software provided with the camera.
°ÊRefer to page 75-100 for software installation instructions.
Note
°§ Execute the edit software, after provided with a camera
Driver is installed.
Refer to page 75-78 for software installation instructions of TWAIN
Driver.
6 6

NOTE IN USING

C a u t i o n !
¢ Ú This camera is composed of very sophisticated parts, If exposed to any of
the following unsuitable environmental conditions the cameras operation will
be impaired. The camera should be kept away from.
°§Severe changs in temperature and humidity.
°§Dust and dirt.
°§Direct sunlight or the inside of a vehicle in hot weather.
°§Do not place the camera in an environment where there is high magnetism
or excessive vibration.
°§An area with high explosives or highly flammable materials.
°§Pesticides, Dust and VinylNever bring into contact with sand.
¢ Ú Never bring into contact with sand.
°§If sand gets into electronic devices like Digimax210SE it can cause severe
malfunctions. Please ensure that there is no contact with sand or similar
particles.
¢ Ú Always be cautious not to expose to extremes in temperature.
°§If the device is transferred from cold place to hot on or vice versa,
condensation can be caused inside the device. If moisture gets into the
TWAIN
camera turn off the device and wait about 1 hour until all moisture is
dispersed. Similarly, moisture build up can happen in CF Card. If this
happens turn off the device and remove the CF Card, then wait until the
moisture has dispersed.
¢ Ú Caution with the Lens.
°§Avoid direct sunlight to lens. Direct sunlight can affect Complementary
Metal Oxide Semiconductor(CMOS) by causing overheating and fading.
¢ Ú If the Digimax 210SE is not used for a long period, electric discharge can
occur. Please make sure the device, batteries, and CF Card are stored
separately.
6 7

Advertisement

loading