Call Waiting - Gioteck EX1-RT Instruction Manual

FUNCTIONALITY
Hold for 2 secs
POWER ON :
until all LED's turn Red.
[Voice Prompt: Power On]
POWER OFF :
until LED turns Red, then off.
[Voice Prompt: Power Off]
TAKE A CALL :
REJECT A CALL :
END A CALL :
Press twice.
REDIAL :
(Re-dialing is only available for the
first device if two are connected.)
VOICE-DIALING :
Press once then say 'Call'
along with the name of the
person you want to ring.
(Voice Dialing is only available for the
first device if two are connected.)
For further details on voice dialling,
refer to your phone manual).
CALL-WAITING
END CURRENT CALL :
Press once.
PUT CURRENT CALL ON HOLD :
Hold for 2 seconds.
This can also be used during
multi-connection of 2 devices.
LOW BATTERY
All LED's will flash Red
once every minute.
[Voice Prompt: Battery Low]
Hold for 3 secs
Press once.
Hold 2 secs.
Press once.
VOLUME INCREASE
Tap to increase the volume
in increments.
VOLUME DECREASE
Tap to decrease the volume
in increments.
MUTE
Hold down for 2 seconds.
A tone will sound every 10
seconds when in mute mode.
Repeat to un-mute.
IMPORTANT:
Please ensure you read the
'For your Safety' section
before using this product.
For technical assistance:
www.gioteck.com/
contact-support