Table of Contents
Advertisement
10
TEIP11, TEIP11-PS I/P SIGNAL CONVERTER | OI/TEIP11/TEIP11-PS-EN REV. M
4 Product identification
Name plate
1 Type designation
2 Ordering number
3 Input signal
4 Output signal
Figure 3: Name plate (example)
Scope of delivery
•
Check the goods for completeness, signs of damage, design
and scope of delivery immediately upon receipt.
•
Check that the delivery matches your order.
Accessories
The following loose accessories are delivered with the unit as
extra items:
•
Aluminum or stainless steel mounting bracket for the
field mount housing in two designs:
- For wall mounting only
- Universal for wall or 2 in pipe mounting
•
Cable entry for I/P signal converter with the 'flameproof
(enclosure) (Ex d)' type of protection.
5 Supply air pressure
6 Serial number
7 Manufacturer address
5 Transport and storage
Inspection
Check the devices immediately after unpacking for possible
damage that may have occurred from improper transport.
Details of any damage that has occurred in transit must be
recorded on the transport documents.
All claims for damages must be submitted to the shipper
without delay and before installation.
Storage conditions
Bear the following points in mind when storing devices:
•
Store the device in its original packaging in a dry and
dust-free location.
•
Observe the permitted ambient conditions for transport
and storage.
•
Avoid storing the device in direct sunlight.
•
In principle, the devices may be stored for an unlimited
period. However, the warranty conditions stipulated in
the order confirmation of the supplier apply.
Ambient conditions during storage
Storage temperature
−40 to 85 °C (−40 to 185 °C)
Humidity
Store device in a dry location.
The device is also protected by a desiccant included
in the original packaging.
Returning devices
For the return of devices, follow the instructions in Repair on
page 15.
Hide quick links:
Advertisement
Table of Contents
