Connecting To Your Pc (Sf4100, Sf4200); Connecting Sf4200 To Your Pc - Samsung SF4000 Operator's Manual

G-Chapter 2(US) 4/16/98 8:30 AM
I
NSTALLATION AND
Connecting to Your PC

Connecting SF4200 to Your PC

Use the serial cable and the parallel print cable that supports bidirectional communications
to connect your machine and the computer.
CONNECTING THE PRINTER CABLE
Note : Make sure you turn the power off by plugging out the power cord before connecting
the machine to your PC. When the connection is completed, turn the power on.
1. Connect the parallel printer cable to the
36 pin printer jack on your machine.
You must use a parallel cable that
supports IEEE-P1284 bidirectional
communications.
2. Fasten the metal clips to the parallel
cable.
3. Connect the other end of the parallel
cable to your computer.
Refer to the instruction manual
that came with your computer to
connect the other end of the printer
cable to your computer.
CONNECTING THE SERIAL CABLE
4. Connect the supplied RS232-C serial
cable to the computer.
Fix the serial cable with screws.
Connect the other end of the serial cable
to your computer.
Refer to the instruction manual
that came with your computer to
connect the other end of the serial
cable to your computer.
Page 2.13
S
ETUP
(SF4100, SF4200)
C T I
HAPTER WO : NSTALLATION AND
Printer
cable
Serial
cable
2.13
S
ETUP