How to Switch an eZLO Hub from Ethernet to Wifi
If you have an eZLO hub connected to your network via Ethernet, and you want to switch it to a WiFI
connection, follow these steps:
1. C heck that:
●
Your eZLO hub is running.
●
The Ethernet cable is plugged into the hub
●
The corresponding LED button is green
2. A ccess your eZLO web application.
3. S elect a hub device from the list and click on it to open its settings.
4. P ress
on the My eZLOs sidebar.
The S ettings page is displayed.
The information in the IP Address section indicates that the eZLO hub is currently connected to the
network via Ethernet, and the IP Address and Network Type (Cable) are displayed.
5. P ress the
The S elect a WIFI Network to Connect d ialog box is displayed.
b utton under the IP Address.
43