Table of Contents
Advertisement
one eZLO Hub to Another Z-Wave Hub
procedure on your Primary Controller (eZLO Hub or third-party controller). For third-party controllers these
procedures appear in the device documentation.
How to Remove a Z-Wave Device from an eZLO Hub
If you have previously added a Z-Wave device to one eZLO hub, and now you want to add it to
another eZLO hub, you must first of all exclude it from the first eZLO hub. To do this, follow these
steps in the eZLO application:
1. Sign in to the eZLO app and select the eZLO hub you want your device to connect to.
2. Click
to display the Devices page.
3. Select the Z -Wave option to filter out only Z-Wave devices (your Z-Wave device will be visible in
the list).
4. Open the Z -Wave Settings dropdown menu and select S tart Excluding any Device .
This enables the exclusion mode on your current eZLO hub.
section) on the future Inclusion controller and follow the Inclusion
22
Advertisement
Table of Contents
