Table of Contents
Advertisement
6. Click O K and D one .
7. Return to the eZLO S ign in page and enter your email address and the new password.
Sign in succeeds and the eZLO app main menu is displayed.
How to Add an eZLO Hub to the App
To set up the eZLO hub you require a power outlet, and an Ethernet or Wi-Fi connection. This section
describes how to add an eZLO hub in the web version of the eZLO app. For information on how to configure
the hub for the mobile application, refer to the eZLO User Guide (Mobile).
The procedure differs slightly when the eZLO hub owner wants to add an eZLO hub operating on a different
network to the one they are currently using. They can add the hub remotely, or via a web browser on a tablet
connected to a 3G/4G network. In the latter case they need to enter the hub's serial number in one of the
wizard pages (see
s tep 5 below)
hub unit.
1. Plug the eZLO hub to the power outlet, connect the Ethernet cable (for an illustration, refer to
eZLO Hub
) .
Wait until the backlight LED blinks blue. This takes approximately 2 minutes.
Figure 2 eZLO Hub Plug
2. Connect the Ethernet cable from the eZLO hub to the Internet-enabled router.
The eZLO hub connects to the server.
3. Wait until the hub's rim LED changes from a blue to a green-color, and the central LED becomes
yellow.
4. Sign in to the eZLO app
. The serial number is printed on a sticker attached to the bottom of the eZLO
12
F igure 1
Advertisement
Table of Contents
