To connect your eZLO hub to another controller as an Inclusion controller:
1. Make sure both controllers are excluded from any Z-Wave networks (see
section).
2.
Click
in the My eZLOs sidebar of the main eZLO hub page.
The Devices page is displayed.
3. Select the Z -Wave c heckbox.
4. Open the Z -Wave Settings dropdown menu and select C ontroller Learn Start .
Note: if you want to interrupt this process, you can select C ontroller Learn Stop option in the
Z-Wave Settings dropdown menu.
5. To start the I nclusion process on Controller to which eZLO Hub is connecting,
controller's user guide.
Notes:
●
if you want to add a third-party controller to your eZLO Hub, start C ontroller Learn mode on the
third-party controller (see its user guide) and start the I nclusion process on your eZLO Hub.
The included Controller will be connected to your Primary controller and listed in its devices list.
●
If an eZLO hub becomes an Inclusion controller, its Z -Wave Settings options are different from
those available for an eZLO Primary Controller.
●
You can't manage your eZLO hub via another primary controller: any Basic command sent will be
ignored.
How to Shift Primary Controller Functions from an eZLO hub to another Z-Wave
Controller and Vice Versa
24
H ow to clean an eZLO
s ee this