Samsung SF-360 Series User Manual page 65

Inkjet telephone fax
Table of Contents

Advertisement

Display
Memory Received
When it toggles with:
Ink Low. Install new ink cartridge
Load paper and press OK
Install ink cartridge
No answer from remote fax
No CID Number
No Dial Number
No Message
No New Message
Not available while reprinting fax
Not Found
Number already
registered
Number Not Assigned
Poll Code Error
Poll job exists already
Polling Error
Check remote site
Receiving Error.
Ask sender to try again.
Record TAM OGM
Remove jammed
document
Remove jammed paper and press
Stop/Clear.
Send Error. Try again.
System Busy
Try again later
To redial now, press Start Fax
Processing Job
8.8
Status/Solution
The machine has data stored in memory. Depending on the mes-
sage do as follows:
Replace the print cartridge with new one.
Load the paper, and press
OK
jam as described in "Paper jams during printing" on page 8.11.
Install a print cartridge.
The other machine has not answered after all your attempts to
send a fax.
The machine could not detect the CID (Caller ID) number.
There is no number in the redial memory, which is successfully
dialled up to now.
There is no message to play or erase. There is no received short
message to read or print.
There is no new caller message. There is no received short
message.
The machine can not receive a new fax while printing the stored
faxes.
The number you are searching does not exist in memory.
The number you are trying to register already exists in the
phonebook or junk fax list.
There is no number assigned to the One-Touch or two-digit
Speed number.
The remote user entered wrong poll code.
You have programmed a polling send. Cancel scheduled job and
try again.
The machine you want to poll is not ready to answer your poll.
The person you are polling should have loaded their fax machine
with a document and be in send poll state.
There is an error while receiving a fax.
To select TAM receive mode, you should record OGM prior to
pressing the
button.
Answer
The document you are sending has jammed in the feeder. To
clear the document jam, see "Document jams during transmis-
sion" on page 8.11.
You tried to copy or fax a document which is longer than
390mm.
The paper has jammed during printing. To clear the paper jam,
see "Paper jams during printing" on page 8.11.
There is an error while sending a fax.
There is no available resource to execute job you ordered.
The machine is waiting to automatically redial the fax number
that was busy or did not answer.
You attempt to enter My Favorites, while sending My Favorites
document or printing My Favorites document.
. There might be a jam. Clear the
Related to:
Fax
Fax
Telephone
Telephone
TAM
(SF-365TP only)
TAM
(SF-365TP only)
Fax
Telephone
Telephone
Telephone
Fax
Fax
Fax
Fax
TAM
(SF-365TP only)
Document
Paper
Fax
Fax
Fax
Fax

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents