Removing Handwheel - Baby Lock Regalia BLRG20 Service Manual

Section 17: Electronic Information - Removing
Handwheel
BabyLock.com
The handwheel can be removed to see some of
the LEDs inside the machine without removing the
machine front cover .
• While holding the handwheel firmly remove
the handwheel screw with a 5 mm hex tool
counterclockwise. You may want to use the "L" hex
tool for more leverage .
• Locate an 8 mm Studio2 Frame or Gallery2 Frame
screw to thread into the handwheel to remove it.
• Install the 8 mm frame screw into the handwheel
while holding the handwheel firmly. Tighten the
screw (clockwise) with a 5 mm hex tool until the
screw pulls the handwheel off the main shaft
tapered end .
Page 45