Baby Lock Regalia BLRG20 Service Manual page 30

Section 10: Replacing Front Cover (Continued)
Page 30
• Start all the screws through the back frame casting
into the front cover. Stagger tighten the screws so
the front cover will go on evenly and not bind.
 NOTE: Back frame casting screw and tool sizes
• Back Screws: M5x80 (five quantity).
• Middle Screws: M5 x 55 top and M5x80 bottom.
(1 each)
• Front Large Screws: M5 x55 (three quantity)
• Front Small Screws: M4 x 44 (three quantity)
• M5 screws use a 4 mm hex driver
• M4 screws use a 3 mm hex driver
Regalia Service Manual