Toshiba Strata CIX User Manual page 65

The Admin tab contains the following sections:
Multiple Attendant
BLF Refresh Rate
Automatic Dialling
Automatic Hold
Activate Incoming Call
Default Transfer
Anticipate DTMF Tone with
Flash
Continuous DTMF
Show BLF Tab
Activate Line Prompt
Max. Caller ID
Max. Called Number
Notes
• The Administrator can change all the above settings.
• The Operator/Attendant can change only PC level settings.
Strata CIX IP Windows Operator Console User Guide 7/06
F
IELD
D
Allow multiple Operator operations.
Enables the Attendant to define the refresh rate for
polling the CIX for BLF/DSS status. The minimum rate
is 1 second. The default is 3.
Enable/Disable automatic dialling. Console will transfer
call as soon as name or DN is matched.
Enable/Disable automatic hold.
Enable/Disable activate incoming call. PC will
automatically switch to operating as the CIX IP
Attendant Console when a new call comes in.
Enable/Disable default transfer (Blind transfer).
Enable/Disable the DTMF Tone dialogue to anticipate
use after Flash. Disable if Flash is used for Call Waiting
on telco lines.
Enable/Disable the continuous DTMF tone.
Displays/Hides the BLF tab from the Call Monitor.
This enables the Prompt to be visible (during the
appropriate conditions). See Control Panel,
Tab" on page 43 and "Prompts" on page
Maximum of Caller ID. Allow the Caller ID telephone
numbers to display in the Caller ID list. The valid value
is from 0 to 20.
Maximum of Called Number. Allow the numbers of
Called Numbers display on the Called List. The valid
value is from 0 to 10.
Administration
Administration View
ESCRIPTION
"Prompts
13.
51