Toshiba Strata CIX User Manual page 31

Note If your Strata CIX telephone system is networked to another Strata CIX system
(using R1.2 or later software), you can see BLF/DSS information for all users.
When using versions prior to CIX R1.2, vacant stations and pilot numbers on a
remote networked system appear in DND status. With R1.2 and higher, these
stations will appear idle on the BLF.
➤
To make a consultation transfer from the BLF/DSS tab
1. With a connected call, click on the destination party. Your console shows
"Announce" and you can announce the call.
Transfer
2. Press
➤
To perform a blind transfer from the BLF/DSS tab
➤
With a connected call, double-click on the destination party. The call immediately
leaves the console and calls the destination.
You can customise the order of the names from the User Directory. See
Note
3 – User Directory
Number of BLF tabs
The number of BLF tabs that appear on your screen varies according to the display
setting on your PC (see below):
Display Setting
600 x 800
1024 x 768
1152 x 864
Strata CIX IP Windows Operator Console User Guide 7/06
Enter
( ) on the keyboard to send the call to the destination party.
for more details.
Maximum Number of BLF Tabs
Call Processing
3
5
7
Making a Call
Chapter
17