Advertisement
®
Advanced Energy
• Configure the flexible link parameters
Adapting Thyro-PX Hardware Configuration
Open parameter file with the unit online in the Port Explorer tab of the Thyro-Tool Pro PC software,
or use the Thyro‑Touch display.
Set the Anybus module slot to Ethernet IP in the Thyro-PX device hardware configuration:
Figure 2. Menu tree
Anybus Parameter Group
When the computer is connected to the Thyro-PX power controller, the Anybus parameter group will
be added to the parameter list after updating the hardware configuration, as shown in the previous
figure.
If the unit is not available for online configuration, the software can also be configured offline.
Contact AE Global Services to obtain a parameter file appropriate to your hardware configuration.
Figure 3. Anybus parameter group
Connecting to the Ethernet IP controller
Some process control software can scan the network to automatically detect and connect to Ethernet
IP devices.
To manually configure the process control software, find the MAC address for the Ethernet IP module
in the General menu. Use the MAC address to configure the process control software.
57010163-00A
™
®
Thyro-PX
Anybus
Ethernet IP
™
®
Thyro-PX
Anybus
Ethernet IP
4
Advertisement
