Advertisement
®
Advanced Energy
HARDWARE DESCRIPTION
This module is compliant with the Ethernet
duplex operation.
Network status
Figure 1. Hardware
Table 1. Network status LED
LED State
Off
Green
Green, blinking
Red
Red, blinking
Table 2. Module status LED
LED State
Off
Green
Green, blinking
Red
Red, blinking
If both the network status LED and the module status LED are red, a fatal error has occurred.
Table 3. Link/activity LED
LED State
Off
57010163-00A
Link/activity port 1
Link/activity port 2
Module status
RJ-45 connectors
No IP address or no power
Online, one or more connections established (CIP Class 1 or 3)
Online, no connections established
IP address conflict detected, fatal error
One or more connections timed out (CIP Class 1 or 3)
No power
Controlled by a scanner in Run state
Not configured, or scanner in Idle state
Major fault (for example, exception state or fatal error)
Recoverable fault(s). Module is configured, but stored parameters
differ from currently used parameters.
No link, no activity
Thyro-PX
®
IP standard, and supports 10/100Mbit, full or half
Description
Description
Description
™
®
Anybus
Ethernet IP
™
®
Thyro-PX
Anybus
Ethernet IP
2
Advertisement
