Mitsubishi Electric RJ71PN92 User Manual page 35

Refresh settings
1.
Set items for refresh as follows.
[Navigation window]  [Parameter]  [Module Information]  [RJ71PN92]  Right-click  [Autorefresh Settings]
• Output devices (iQ-R CPU -> PN Controller) tab
• Input devices (iQ-R CPU <- PN Controller) tab
2.
Click the [OK] button to complete the settings.
Updating global labels and structures
1.
Update global labels and structures related to the RJ71PN92.
[Navigation window]  [Parameter]  [Module Information]  [RJ71PN92]  Right-click  [Update PROFINET Label]
2.
Convert or rebuild programs.
[Convert]  [Convert] or [Rebuild All]
3.
Write the set parameters to the CPU module and the RJ71PN92. Then reset the CPU module or power off and on the
system.
[Online]  [Write to PLC]
In this example, default values are used for parameters that are not shown above. For the parameters, refer to
the following.
 MELSEC iQ-R PROFINET IO Controller Module User's Manual (Application)
7.1 Communication Example of the RJ71PN92 and an IO Device
7 COMMUNICATION EXAMPLE
7
33