Monitoring Pim - Cisco Catalyst 2960-XR Configuration Manuals

Configuring PIM
Command or Action
Step 4
end
Example:
Switch(config-if)# end
Step 5 show ip igmp interface [interface-id]
Example:
Switch# show ip igmp interface
Step 6 copy running-config startup-config
Example:
Switch# copy running-config
startup-config

Monitoring PIM

Use the privileged EXEC commands in the following table to monitor your PIM configurations.
Table 8: PIM Monitoring Commands
Command
show ip pim all-vrfs tunnel [tunnel tunnel_number
| verbose]
show ip pim autorp
show ip pim boundary
show ip pim interface
show ip pim mdt [ bgp ]
show ip pim neighbor
OL-29426-01
Catalyst 2960-XR Switch IP Multicast Routing Configuration Guide, Cisco IOS Release 15.0(2)EX1
Purpose
Returns to privileged EXEC mode.
Verifies your entries.
(Optional) Saves your entries in the configuration file.
Purpose
Displays all VRFs.
Displays global auto-RP information.
Displays information about mroutes filtered by
administratively scoped IPv4 multicast boundaries
configured on an interface.
Displays information about interfaces configured for
Protocol Independent Multicast (PIM).
Displays details about the Border Gateway Protocol
(BGP) advertisement of the route distinguisher (RD)
for the multicast distribution tree (MDT) default
group.
Displays the PIM neighbor information.
Monitoring PIM
69