Configuring Candidate Bsrs - Cisco Catalyst 2960-XR Configuration Manuals

Configuring PIM
Command or Action
Step 5
end
Example:
Switch(config-if)# end
Step 6 show running-config
Example:
Switch# show running-config
Step 7 copy running-config startup-config
Example:
Switch# copy running-config startup-config

Configuring Candidate BSRs

You can configure one or more candidate BSRs. The devices serving as candidate BSRs should have good
connectivity to other devices and be in the backbone portion of the network.
This procedure is optional.
SUMMARY STEPS
1. configure terminal
2. ip pim bsr-candidate interface-id hash-mask-length [priority]
3. end
4. show running-config
5. copy running-config startup-config
DETAILED STEPS
Command or Action
Step 1 configure terminal
Example:
Switch# configure terminal
OL-29426-01
Purpose
Returns to privileged EXEC mode.
Verifies your entries.
(Optional) Saves your entries in the configuration file.
Purpose
Enters the global configuration mode.
Catalyst 2960-XR Switch IP Multicast Routing Configuration Guide, Cisco IOS Release 15.0(2)EX1
Configuring PIMv2 BSR
61