Monitoring Cgmp - Cisco Catalyst 2960-XR Configuration Manuals

Monitoring CGMP

Command or Action
Example:
Switch# copy running-config
startup-config

Monitoring CGMP

You can display specific statistics, such as the contents of IP routing tables, caches, and databases.
This release does not support per-route statistics.
Note
You can display information to learn resource usage and solve network problems. You can also display
information about node reachability and discover the routing path that packets of your device are taking
through the network.
You can use any of the privileged EXEC commands in the following table to display various routing statistics.
Table 5: Commands for Displaying System and Network Statistics
Command
ping [group-name | group-address]
show ip igmp groups [group-name |
group-address | type number]
show ip igmp interface [type number]
show ip mcache [group [source]]
show ip mpacket [source-address | name]
[group-address | name] [detail]
show ip mroute [group-name |
group-address] [source] [summary]
[count] [active kbps]
show ip pim interface [type number]
[count] [detail]
show ip pim neighbor [type number]
Catalyst 2960-XR Switch IP Multicast Routing Configuration Guide, Cisco IOS Release 15.0(2)EX1
32
Purpose
Verifies the Layer 2 Catalyst switch CGMP-client configuration. For more
information, see the documentation that shipped with the product.
Purpose
Sends an ICMP Echo Request to a multicast group address.
Displays the multicast groups that are directly connected to the
switch and that were learned through IGMP.
Displays multicast-related information about an interface.
Displays the contents of the IP fast-switching cache.
Displays the contents of the circular cache-header buffer.
Displays the contents of the IP multicast routing table.
Displays information about interfaces configured for PIM. This
command is available in all software images.
Lists the PIM neighbors discovered by the switch. This
command is available in all software images.
Configuring CGMP
OL-29426-01