Grandstream Networks HT801 Quick User Manual page 2

CALL HOLD

During an active call, press "Flash" button
on the analog phone (if the phone has that
button) to place the call on hold.

Press "Flash" button again to release
previously held caller and resume
conversation.
Note: If no " Flash" button is available, use
"hook flash" (toggle on-off hook quickly).
CALL WAITING
The call waiting tone (3 short beeps) indicates
an incoming call, if the call waiting feature is
enabled.

To toggle between incoming call and
current call, you need to press the "Flash"
button. The first call is placed on hold.

Press the "Flash" button to toggle between
the active calls.
CALL TRANSFER
Blind transfer
Assuming that phones A and B are in
conversation. The phone A wants to blind
transfer phone B to phone C:

On the phone A, press "Flash" button to
hear the dial tone.
 The phone A dials *87 then dials caller C's
number, and then # (or wait for 4
seconds).

The phone A will hear the dial tone. Then,
phone A can hang up.
Note: "Enable Call Feature" must be set to
"Yes" in web configuration page.
Attended transfer
Assuming that phones A and B are in conversation.
The phone A wants to attend transfer phone B to
phone C:
1. On the phone A, press "Flash" button to hear the
dial tone.
2. Phone A dials the phone C's number followed by
# (or wait for 4 seconds).
3. If phone C answers the call, phones A and C are
in conversation. Then A can hang up to complete
transfer.
4. If phone C does not answer the call, phone A
can press "flash" to resume call with phone B.
Note: When attended transfer fails and A hangs
up, the HT801 will ring back user A to remind A that
B is still on the call. A can pick up the phone to
resume conversation with B.
3-WAY CONFERENCING
The HT801 support Bellcore style
Conference. To perform the 3-way conference, we
assume that the call is established between phone
A and B. Phone A (HT801) wants to bring third
phone C into conference:
1. Phone A presses FLASH (on the analog phone,
or Hook Flash for old model phones) to get a
dial tone.
2. Phone A dials C's number then # (or wait for 4
seconds).
3. If phone C answers the call, then A presses
FLASH to bring B, C in the conference.
4. If phone C does not answer the call, phone A
can press FLASH back to talk to phone B.
5. If phone A presses FLASH during conference,
the phone C will be dropped out.
6. If phone A hangs up, the conference will be
terminated for all
configuration "Transfer on Conference Hang
up" is set to "No". If the configuration is set to
"Yes", A will transfer B to C so that B and C
can continue the conversation.
CALL RETURN
In order to call back to the latest incoming
number.
1. Pick up the handset of the connected phone
(Off-hook).
2. After hearing the dial tone, input "*69", and
follow by "#" or wait for time out.
3. Your phone will automatically call back to the
latest incoming number.
Note: Star codes (*XX) related
mentioned above are supported by ATA default
settings. If your service provider provides different
feature codes, please
3-way
instructions.
three parties when
features
contact them for