Needle Threader - Bernina Bernette b37 Instruction Manual

CAUTION:
Turn OFF the power switch when using the needle
threader.

Needle threader

Lower the presser foot. Raise the needle to its highest posi-
tion. Pull down the needle threader
Needle Threader
Turn the needle threader away from you so the hook comes
out through the needle eye. Draw the thread around the
guide and under the hook
Guide
Hook
Turn the needle threader toward you to pull the thread
through the needle eye. Raise the needle threader in the
direction of the arrow, drawing the thread loop through the
needle.
Pull the thread through the needle eye.
PLEASE NOTE:
The needle threader can be used with a #11 to #16 needle
or a blue shank needle. Thread sizes 50 to 90 are recom-
mended.
as far as it will go.
.
19