Parameters - ABB SV/S 30.160.1.1 Product Manual

®
ABB i-bus KNX
Start-up
3.3

Parameters

The SV/S 30.640.5.1 and SV/S 30.320.2.1 power supplies have an application program which allows you
to set the measured and status values that can be queried. ETS is required for this programming.
The application program is available in ETS under ABB/System devices/Power Supplies.
The following section describes the parameters of the application program. Parameter windows are
structured dynamically so that further parameters may be enabled depending on the settings and the
function.
The default values of the parameters are underlined, e.g.
Options: yes
no
SV/S xx.xxx.x.1 | 2CDC501049D0201 Rev. A 21