Paging Group - Huawei eSpace 7910 User Manual

eSpace 7910&7950 IP Phone
User Guide
l
You can determine whether you have signed in to a hunt group according to the LED of the
programmable button that has the hunt group function configured.
Press the programmable button that has the hunt group function configured. If the LED of this
programmable button is steady green, and
in to the hunt group.
If you want to sign out of the hunt group, press that programmable button again. The LED of
this programmable button is off.
Hunt Group Calling
If no one in a hunt group answers incoming calls when all members in the hunt group are
busy, offline, not signed in, or when the total ringing duration exceeds the maximum time
limit, the system disconnects the calls, places the calls on hold, or transfers the calls to the
voicemail or other specified numbers according to the preset policies.
For details about how to retrieve voice messages in the voicemail for a hunt group, see
Voicemail.

6.26 Paging Group

An enterprise can add multiple numbers to a paging group. After the access code of the
paging group is dialed through a specific group, unidirectional voice broadcast to all members
in the group is enabled.
Based on the calling mode, paging groups are classified into unicast and multicast.
l
l
Issue 03 (2017-06-30)
Static sign-in mode: Members in a hunt group are automatically signed in. They cannot
sign out.
NOTE
l If your account is statically signed in to the hunt group, you cannot sign out even if you press the
corresponding programmable button again. The LED of this programmable button is steady green.
l For details about how to configure the hunt group function for a programmable button, see
Buttons.
NOTE
l For members in a hunt group, the hunt group service takes precedence over call forward all and
DND services.
l The IP phone supports distinctive ringtones for calls destined for hunt groups. For details about how
to set the ringtone for the hunt group, see
l In the incoming call notification screen for a hunt group, the phone number and name of the calling
party, and the hunt group access code are displayed.
NOTE
To use the paging group function, ensure that your account has been assigned the paging group right. For
any questions, contact your system administrator.
Unicast: The system uses conference resources to convene members in the paging group
and enable unidirectional voice broadcast. The number of recipients is restricted by
conference resources.
Multicast: The system creates a virtual participant to join a conference and enable voice
broadcast through IP multicast of switches or routers.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
is displayed in the status bar, you have signed
4.1.1 Ringtone.
6 Phone Usage
4.1.6
6.37
91