Led - Huawei eSpace 7910 User Manual

eSpace 7910&7950 IP Phone
User Guide
Button
Volume button (only for eSpace 7910)
Speaker button (with an LED)
Headset button (with an LED)
Mute button (with an LED)

3.1.2 LED

Table 3-2
Table 3-2 LED description
LED
MWI LED
Issue 03 (2017-06-30)
describes the LED status.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Description
When the phone is idle or ringing, you can:
l Press + to turn up the volume of the
ringtone.
l Press - to turn down the volume of the
ringtone.
When the phone is offhook, dialing, or in an
active call, you can:
l Press + to turn up the volume of the
handset, headset, and speakerphone.
l Press - to turn down the volume of the
handset, headset, and speakerphone.
When a call comes in, you can press the
button to answer the call in speaker mode
and press the button again to end the call.
For details about the button LED status, see
3.1.2 LED.
When a call comes in, you can press the
button to answer the call in headset mode
and press the button again to end the call.
For details about the button LED status, see
3.1.2 LED.
Turns mute on and off. Mute disables the
audio input for your audio devices, such as a
headset, speakerphone, or microphone. With
mute enabled, you can hear other parties on
the call but they cannot hear you.
For details about the button LED status, see
3.1.2 LED.
Description
l When a call comes in, the LED blinks
red every second.
l When there is an unread message, the
LED blinks red every 3 seconds.
3 IP Phone Overview
7