Huawei eSpace 7910 User Manual page 120

eSpace 7910&7950 IP Phone
User Guide
Description
Hold/Resume a
call
Blind Transfer
Divert a call
Perform two-stage
dialing
Outbound call
DND
Issue 03 (2017-06-30)
Description
When the linkage-enabled account of your IP phone is engaged in a
call, your IP phone and the linked PC Client both display the talking
screen/window.
l Click Hold on the linked PC Client. The call is held on the
corresponding line on the IP phone.
l Click Resume on the linked the PC Client. The call is resumed on
the corresponding line on the IP phone.
NOTE
A CC line cannot be placed on hold. You can switch a call from a common line
to a CC line but cannot switch it back from the CC line to the common line.
When the linkage-enabled account of your IP phone is engaged in a
call, your IP phone and the linked PC Client both display the talking
screen/window.
Click Transfer and enter the transfer-to number on the linked PC
Client.
When the linkage-enabled account of your IP phone is engaged in a
call, your IP phone and the linked PC Client both display the talking
screen/window.
Click Transfer and enter the transfer-to number on the linked PC
Client.
When the linkage-enabled account of your IP phone is engaged in a
call, your IP phone and the linked PC Client both display the talking
screen/window.
Open the keypad for two-stage dialing on the linked PC Client and
perform two-stage dialing.
l When the linked PC Client is used to make an outbound call, the
IP phone automatically goes offhook.
l When the IP phone is used to make an outbound call, the linked
PC Client displays a state indicating that the call is automatically
answered.
NOTE
The phone linkage service does not work for the automatic outbound and
Callback services.
Enable or disable the DND service on the linked PC Client. The IP
phone automatically enables or disables the DND service.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 Phone Usage
112