Restart; Status; Peripheral Status (Only For Espace 7950 Ip Phone); Network - Huawei eSpace 7910 User Manual

eSpace 7910&7950 IP Phone
User Guide
Lock Password
You can specify a phone lock password depending on your needs.
Step 1 On the home screen, choose Apps > System > Lock Password.
The Lock Password screen is displayed.
Step 2 Enter the old password and the new password, and reenter the new password.
Step 3 Press Done.
----End

4.2.7 Restart

You can perform the following steps to restart the phone:
Step 1 On the home screen, choose Apps > System.
Step 2 Select Restart and press Select.
The message "Are you sure you want to restart the phone?" is displayed.
Step 3 Press Restart.
----End

4.3 Status

4.3.1 Peripheral Status (only for eSpace 7950 IP Phone)

You can perform the following steps to view the status of the expansion module, Bluetooth
device, and USB device connected to the phone:
Step 1 On the home screen, choose Apps > Status.
Step 2 Select Peripheral Status and press View.
----End

4.3.2 Network

You can perform the following steps to view network information about the phone, including
the IP address, gateway address, and subnet mask:
Issue 03 (2017-06-30)
NOTE
l If you set the phone lock password for the first time,
enter the new password and confirm password.
l If you enter an incorrect old password five consecutive times, wait 1 minute and reenter the
password.
NOTE
l If the Lock Password option is not displayed on your phone, contact your system administrator.
l To ensure phone security, periodically change your phone lock password. The password must
contain at least four characters. Ensure that the password meets complexity requirements.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Phone Settings
41