Switching Between Handset, Speaker, And Headset Modes; Contacts; Adding Contacts - Huawei eSpace 7910 User Manual

eSpace 7910&7950 IP Phone
User Guide
6.12 Switching Between Handset, Speaker, and Headset
Modes
You can switch the audio output mode of a phone during a call. The mode in use will be
displayed in the status bar of the phone screen.
l
l
l

6.13 Contacts

6.13.1 Adding Contacts

Step 1 Press the Contacts button.
The Contacts screen is displayed.
Step 2 Press Add.
The Add Contact screen is displayed.
Step 3 Modify the contact information.
Select Office Tel, Family Tel, Mobile Tel, or Other Tel, and press Primary. The selected
number is set to the primary number to dial by default.
Step 4 Press Done.
----End
Issue 03 (2017-06-30)
NOTE
A headset is required when the audio output mode is set to headset.
Switching to speaker mode
In handset or headset mode, you can press the Speaker button to switch to speaker mode.
After the switching,
Switching to handset mode
The phone in speaker or headset mode automatically switches to handset mode once you
pick up the phone.
Switching to headset mode
In speaker or handset mode, you can press the Headset button to switch to headset mode.
After the switching,
NOTE
If the Add softkey is not displayed, you can press the Up or Down arrow button to select a contact and
press More to display the Add softkey.
NOTE
l To change the ringtone for a contact, select Ringtone and press Modify.
l To change the profile picture for a contact, select the profile picture and press Modify. Only the
default profile pictures can be used.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
is displayed in the status bar of the phone screen.
is displayed in the status bar of the phone screen.
6 Phone Usage
74