Installing The Transmitter S - Satron Instruments SATRON VC Installation And Setting-Up Instructions

SATRON VC Optical Consistency Transmitter
1.2 I 1.2 Installing the transmitter tallin th tr
1. Ensure that the installation valve is clean from process media which could dam-
age the transmitter prior to inserting the transmitter into it.
2. Insert the transmitter into the valve and turn to fasten the valve coupler. Tighten-
ing torque 40 Nm.
3. Align the installation tool slots (C1 and C2) with the transmitter slots and connect
the installtion tool.
4. Turn the installation ball valve fully open and insert the trasmitter into the process,
by turning the installation tool lever clockwise.
Figure 1-2a Mounting the transmitter on the coupling
itte
C1
3
C2
BCs220AV
Revision 2
15.10.2014