Satron Instruments SATRON VC Installation And Setting-Up Instructions page 11

SATRON VC Optical Consistency Transmitter
SETCLOCK: SETCLOCK:
Aika ja pvm(pp.kk.vvvv -hh.mm.ss) asetukset
HART:
Tässä valikossa tehdään Multidrop-toiminnan ase-
tukset. Multidrop-toiminnassa kaikkien multidrop-
väylään asetettujen lähettimien lähtöviesti asettuu
4 mA:iin. Osoit teel la 0 on käy tössä 4...20 mA:n
vir tasil muk ka, jolloin lähetin toimii normaalisti 4...20
mA signaalilla.
DISPLAY:
In this menu you can select the looks in which the dis-
play will be read.
BACKLGHT: Select the intensity of the backlighting from
OFF, LOW, MEDIUM and HIGH.
ANGLE: lets you select the angle of the text.
NORMAL: From left to right. Transmitter mounted hori-
zontally with process connection directed to the right.
ROTATED: Rotates the text 180 degrees from NOR-
MAL.
PASSWORD:
From this menu you can set a password (0...999) for the
analyzer. If a password has been specifi ed, you cannot
set any parameters or make any other settings on the
analyzer unless you enter the correct ID number in this
menu. Password is not in use when PASSWORD is
000 after reset. You enter the PASSWORD in the same
way as TAG. PASSWORD will be on when you defi ne a
value between 1 and 999. If you forget password get on
to Satron Instruments Inc.
FACTORY:
Restore Factory settings. After entering this menu you
will get a warning message that the confi gurations will
be lost after this point. To cancel the procedure press
ESC.
LANGUAGE:
Select the Display language.
ENGLISH, FRENCH.
T UNIT:
Selected the temperature unit from this menu. The
unit can be Celsius (°C) or Fahrenheit (°F).
PV UNIT:
Selected the unit for process value in the display
from this menu. (mg/l, % CS ...)
LED CURR:
(the LED intensity settings)
Select the amount of current, which is used for LED
(%)
INFO
You can select the device information menu from the Main
Menu level with the ENTER key. Use the UP/DOWN keys to
view these items. Press ESC key to return to the Main Menu
level. You cannot change the data displyed in this menu.
MANUFACTURER:
MANUFACTURER: MANUFACTURER:
Manufacturer's name. (SATRON) Cannot be changed.
DEVICE TYPE:
The type code of device.
VERSION:
Version numbers of the transmitter's electronics and
software. Press ENTER to select this item. Press ESC
to exit. With the UP/DOWN keys you can select either
CPU HW, CPU SW, ADC HW, ADC SW or MAN REV
(manual revision) revision number or CPU ID-number
from this submenu.
ASSEMBLY NUMBER:
The analyzers assembly number. Press ENTER to select
this item. Press ESC to exit. For instance, assembly
number 0901 shows that the transmitter was made in
week 01 of the year 2009.
SERIAL NUMBER:
Serial number. Cannot be changed.
OPERATION TIME:
The value of the operation time save at 1 hour intervals.
When the value of the counter is < 100 hours so value
save 1- minute intervals. The value of the operation time
counter on the display :
HH :MM :SS when the value of counter is <100 hours
HHHH : MM when the value of counter is <100000 hours
HHHHHHHH when the value of counter is ≥100000
hours
I/ I/O CONFIGURATION I/
Co Co Confi gure parameters that have an effect on the INPUT and
OU OU OUTPUT relays (VC transmitters with N- and L-housing)
Sa Sa Satron highly recommends the use of the software package
VO VO VOadviser to alter these settings!
Settings menu for input / output
N) or input PIN 1...3, output DOUT 1...3 and IO2
(housing type L)
TYPE:
Select the function (housing type N)
When "NONE" is selected in the I / O is turned off.
To use the digital input to select DIN1. To use the
digital outputs, select the DOUT1. To use the second
current output confi gurable external input IO2 select
EXT (only I / O 2). To use the second current outputs
confi gurable to select IO2 (only I / O 3)
FUNCTION:
The digital input / output function settings
HI LIMIT the digital output will change its state
depending on the HI VALUE.
LO LIMIT the digital output will change its state
depending on the LO VALUE.
11 11 11
BCs220AV
Revision 2
15.10.2014
.
Cannot be changed
, I/O 1...3 (housing type