How To Use Sauté Function - Morphy Richards Total Control Manual

501020 Rev 1.qxp_Layout 1 26/08/2016 09:54 Page 9
How To Use Sauté Function
Ensure the Total Control Soup Maker is
unplugged from the mains. Remove the Lid
(4), be careful not to touch the Serrator Blade
(8). WARNING: Sharp Blade.
Press the Mode Button
Function Indicator
Replace the Lid (4).
After a minute, remove the Lid
carefully add the ingredients for sautéing to
the Removable Vessel (7). Replace the Lid
and allow the program to continue.
You may need to remove the Lid and stir the
ingredients part way through, refer to
individual recipes from page 16.
WARNING: Add ingredients carefully to
avoid fat splashing.
When the Lid
(4) to continue the process. The Lid
memory will retain the setting, there is no need to reset.
M P
MODE PORTION
START
STOP
(22) until the Sauté
(16) is highlighted.
(4) and
(4) is removed during sauté function to stir or add ingredients simply replace the Lid
(4) needs to be in place to continue sautéing. The Soup Maker
1
Add a little oil to the Removable Vessel (7). Plug
the Total Control Soup Maker into the mains.
3
M
MODE
Press the Start/Stop Button
Soup Maker will now begin to heat up.
When finished press the Start/Stop Button
(23). Add the rest of the ingredients to the
(4) Removable Vessel
making process by selecting the desired
soup program as shown on page 7.
2
4
P
PORTION
START
STOP
(23) and your
(7) and begin the soup
9