How To Use Reheat Function - Morphy Richards Total Control Manual

501020 Rev 1.qxp_Layout 1 26/08/2016 09:54 Page 11

How To Use Reheat Function

Ensure the Total Control Soup Maker is
unplugged from the mains. Remove the Lid
(4), be careful not to touch the Serrator Blade
(8). WARNING: Sharp Blade.
Place the Lid
ensuring it is securely in place. Plug the Total
Control Soup Maker into the mains.
Press the Start/Stop Button
processing time will countdown on the
LED screen (21)
NOTE: The correct portion size must be selected on the control panel to match with the
portions of soup added, failure to do this will not heat the soup to the correct temperature.
Soup consistency may vary after the reheat process.
When reheating chunkier soups the soup will become smoother in consistency.
(4) back onto the Jug Body
M P
MODE PORTION
START
STOP
(23) and the
.
1
Place the home made soup you would like to
reheat into the Removable Vessel (7). 2
portions minimum, 4 portions maximum.
3
(10) Press the Mode Button
Function Indicator
the Portion Button
size (2, 3 or 4).
5
When finished, the Total Control Soup Maker
will beep for 10 seconds. Unplug from the
mains, remove the Lid
M P
MODE PORTION
START
STOP
(22) until the Reheat
(18) is highlighted. Press
(24) to select your portion
(4) and serve.
2
4
6
11