How To Use Pre-Clean Function - Morphy Richards Total Control Manual

501020 Rev 1.qxp_Layout 1 26/08/2016 09:54 Page 13

How To Use Pre-Clean Function

Ensure the Total Control Soup Maker is
unplugged from the mains. Remove the Lid
(4), be careful not to touch the Serrator Blade
(8). WARNING: Sharp Blade.
Place the Lid
ensuring it is securely in place. Plug the Total
Control Soup Maker into the mains.
Press the Start/Stop Button
processing time will count down on the
LED screen (21). The Pre-Clean program will
run for 4 minutes.
NOTE: The Pre-Clean function will clean the base only. Additional cleaning is required for the
Removable Vessel
Maker with water until the water is clear of soap bubbles.
WARNING: Take care as the Removable Vessel
(4) back onto the Jug Body
M P
MODE PORTION
START
STOP
(23) and the
(7) and Lid (4). See A Dream to Clean on page 32. Rinse out your Soup
1
Pour in 800ml of water into the Removable
Vessel (7) and add a small amount of washing
up liquid.
3
M
MODE
(10) Press the Mode Button
Pre-Clean Function Indicator
highlighted.
5
When the Pre-Clean cycle has finished
ensure the Total Control Soup Maker is
unplugged from the mains. Remove the Lid
(4), be careful not to touch the Serrator Blade
(8). WARNING: Sharp Blade.
(7) will be hot after the Pre-Clean cycle.
4
P
PORTION
START
STOP
(22) until the
(20) is
6
13