NEC Storage M110 Setup Manual page 14

８
Initializing the Disk Array Unit
Initialize the disk array. The initialization method differs depending on the model.
8-1
Collecting host information for FC connection or iSCSI Opt connection
・ To automatically collect host information on an FC model, go to 8-2.
・ If the Disk array unit has only iSCSI connection, go to 8-2.
Collect host information from the application server. See the following section:
FC connection
SAS connection
8-2
Initializing and configuring the disk array
FC connection
Initialize and configure the disk array from the iSM client. See the following section:
5-3 Initializing the FC connection
iSCSI connection
Initialize the disk array from the iSM client. Configure the disk array after setting up
the iSCSI initiator for the application server. See the following section:
6-2 Initializing the iSCSI Connection
5-2 Retrieving Host Information - Overview
7-2 Retrieving Host Information - Overview