pLayBacK
play
You can play data stored in the HDD and backup a desired portion of the data.
Using the mouse may help easy setup.
1.
In Live mode, click <play> in the right-click menu or
<
> in the launcher menu, or press the Play button on
the remote control or the front panel.
.
Use the up/down button (▲▼) to select a menu.
`
For data search, refer to <Search>. (Page 64)
.
Select a data item and click <play> in the Search menu.
The selected data is played and the play launcher appears
on the screen.
`
If there is an existing data, <Play> will start immediately without
performing the search.
~
: You can play up to 4 channels in real time.
- In a split mode, the real time playback may not be
supported, depending on the record quality, resolution
and number of channels. And some frame rates may be
supported.
Playback Information : Displays the date and time of the current data in the top corner.
~
Mode Switch : Select a desired play mode or press the [mode] button to switch the mode in the sequence
~
of 1-split, 4-split, 9-split, 16-split and 13-split.
`
The grey area in the center of the 13-split mode plays the Live channel.
The default channel of the Live mode is CH1, which can be changed later.
: Switches to Live mode.
~
: Records all channels in Live mode.
~
REC
~
Play Time : Displays the time and date of the current video.
Play Bar : Displays the time of recorded data in the selected channel for the past 24 hours; the red gridline
~
indicates the current play time.
M
`
Speed : Supports various speed options of x1, x2(-2), x4(-4), x8(-8), x16(-16), x32(-32) and x64(-64).
`
Slow : Supports slow speed options of x1/2(-1/2), x1/4(-1/4) and x1/8(-1/8).
~
Backup : Click <
time of backup; you can specify a backup area using the
mouse (yellow triangle).
Click <
the backup and the "Backup range" window appears.
- Format: Supports formats of DVR, AVI and SEC.
Refer to a list of formats in "setting the Backup".
(Page 54)
- Device: Select a backup device.
- Check Capacity : Enables you to check the capacity of the
selected storage device.
.
If you want to return to the Live screen in Play mode, click <
[ @ ] button on the remote control or the front panel.
00769B_SHR-8162_ENG-NEW.indb 67
> to set the current time to the start
> again to set the current time to the end time of
Scene Mode
SPOT OUT
Audio Off
Freeze
Stop Alarm
Record
Play
Search
Backup
Main Menu
Shutdown
Launcher hide
Logout
PTZ
Alarm
Backup Range
Start
End
2009-01-01 00:01:06
2009-01-01 08:25:45
Device
None
Format
DVR
Folder
\20090101\
Filename 0001
change
Backup
Check capacity
Used
Free
Backup
Cancel
> in the launcher menu or press the
English _
Freeze
REC
2008-12-04 오전 10:16:16