Table of Contents
Advertisement
live
getting started
starting the system
1.
Connect the power cable of the DVR to the wall outlet.
.
Press the Power button on the front panel.
.
You will see the initialization screen.
The initialization process will last about 1 minute in the
order of icons appeared.
If a new HDD is installed, the initialization process may take
a longer time.
.
The live screen appears with a beep.
shutting down the system
You can shut down the system only if you have logged in to the DVR.
You should have the <shutdown> permission to shut down the system if you are not an admin.
1.
Press the [power] button on the remote control or the
front panel, or right-click to display the context sensitive
menu and select <shutdown>.
.
The "shutdown" confi rmation window appears.
.
Use the arrow keys on the remote control or the front panel
to move to <oK> and press the [enter] button or click
<oK>.
The system will shut down.
M
`
For the permission management, refer to "Permission
Management > Setting Permissions". (Page 38)
00769B_SHR-8162_ENG-NEW.indb 23
Shutdown
Are you sure to shutdown?
OK
Cancel
English _
2008-12-04 오전 10:14:33
Advertisement
Table of Contents
