Table of Contents
Advertisement
installation
.
Install a HDD (x1) on the lower bracket and fi x it with
screws.
.
Install HDDs (x3) on the upper bracket and fi x them
with screws.
.
When the installation of additional HDDs is done,
insert the lower and upper brackets into the DVR
and fi x them with the provided screws.
.
When the installation of additional HDDs is done,
connect the power cable and connect the HDD
data cables (SATA Cable) to connectors ~ on
the main board.
`
Note that the number of a HDD data calbe is nothing to do
with operation of the HDD. Just make arrangements of the
with operation of the HDD. Just make arrangements of the
connectors considering the length of each connector.
connectors considering the length of each connector.
.
Check if the connectors are properly connected and
there is no problem with wiring, and close the cover
and fi x it with screws.
1_ installation
00769B_SHR-8162_ENG-NEW.indb 18
Upper Bracket
Add
Add
Installed by default
Add
Upper Bracket
Add
Lower Bracket
Lower
Bracket
Cover
2008-12-04 오전 10:14:24
Advertisement
Table of Contents
