Samsung SHR-8080 User Manual page 102

appendix
Symptom
A message of "Need to reset date/time." Is displayed
on the screen.
The time bar is not displayed in Search mode.
The "NO HDD" icon and an error message are
displayed.
I have installed an additional HDD on the DVR but it
does not recognize the HDD.
I have connected an external storage device (external
SATA HDD) to the DVR but the DVR seems not to
recognize it.
If I press the ESC key in full screen mode of the
WebViewer, the system does not switch to a normal
split mode.
10_ appendix
00769B_SHR-8162_ENG-NEW.indb 102
Countermeasures
 This message is displayed if there occurs a problem with the time
setting of the internal clock or an error in the clock itself. Contact the
retailer or the service center for more information.
 The timeline can switch between normal and extension mode.
In extension mode, the time bar may not be displayed in the current
timeline. Switch to normal mode or use the left or right button to
navigate through the time bar.
 Check the HDD for connection. If the problem persists in a normal
condition, contact the nearest service center to have the HDD checked
by the service personnel.
 See the compatibilty list to check if the additional HDD is supported by
the DVR. For the compatibility list, contact the retailer where you
purchased the DVR.
 See the compatibility list of external storage devices to check if the
connected device is supported by the DVR.
For the compatibility list, contact the retailer where you purchased the
DVR.
 Press the ALT+TAB keys to select 'ACTIVE MOVIE' and press the ESC
key again. The system will switch to a normal split mode.
2008-12-04 오전 10:17:46