Bomag BW 900-2 Operating Instructions Manual page 23

actuate = press the button completely
down, it will automatically lock
in fully pressed position.
unlock = turn the button clockwise and
release it.
to drive = return the travel lever first to
braking position, then start the
engine and actuate the travel
lever again.
For safety reasons the machine can only start to
drive after returning the travel lever to braking po-
sition.
Fig. 8
No. 3 = Engine oil pressure warning light
lights up = when switching the ignition on,
in case of an engine oil pres-
sure drop, shut the engine
down immediately.
goes out = after starting the engine.
Fig. 9
No. 4 = Parking brake warning light
BW 900-2
lights
goes out
Fig. 10
No. 5 = Charge control light
lights up
goes out
Caution
!
If the control light lights up while the engine is
running, the battery is not being charged. Per-
form trouble shooting and have the fault cor-
rected.
Fig. 11
No. 6 = Warning light for seat contact switch
B O M A G
I n d i c a t o r s a n d C o n t r o l s
= with the ignition switch in posi-
tion "I" (test), with travel lever
in neutral position, parking
brake closed.
= when the travel lever is moved
out of neutral position and the
driver's seat is occupied*.
Parking brake released.
= when switching the ignition on
(test), in case of charging
faults during operation.
= after starting the engine.
*
2 3