Table of Contents
Advertisement
X-TRACTOR
®
8A WELDING FUME EXTRACTOR
GENERAL DESCRIPTIONS
The X-Tractor 8A is a self-contained, high vacuum system for the
removal and filtration of welding fume particles and other point
source particulate. It is designed to supply suction for six fume guns
or small suction heads and is suitable for heavy duty welding appli-
cations and continuous use.
Welding fume enters the X-Tractor 8A through a connection on the
rear side of the machine. It then passes through the filter, the blower
and exits through an internal silencer.The blower is powered by a
three phase electric motor. A special direct cooling system assists in
cooling the blower.
The vacuum level depends upon the amount of airflow through the
blower. Therefore, extraction performance will vary depending on the
number and type of extraction devices in use.
The X-Tractor 8A features an integrated automatic filter cleaning
system. A timer signals a pulse of compressed air that shakes the
particulate from the outside surface of the filter so that it falls into the
dustbin. This air jet is released from an on-board tank of compressed
air that is pressurized from an external source through a fitting on the
front of the machine.
Unit includes:
• Filter Cartridge
• Automatic Filter Cleaning System
• Automatic Operation Connection
TECHNICAL
SPECIFICATIONS
MOTOR SPEED
POWER
VOLTAGE
CURRENT
CABLE DIAMETER
INLET / OUTLET DIAMETER
NET WEIGHT
NOISE LEVEL
RECOMMENDED
COMPRESSED AIR
INPUT COMPRESSED AIR
FILTER MATERIAL
FILTER AREA
FILTER CLASS
FILTRATION EFFICIENCY
(ZH1/487-2)
TYPE
AIRFLOW (MAX.)
STATIC PRESSURE (MAX.)
FAN SPEED
NOTE: Technical specifications are subject to change without prior notice.
Specifications and guarantees are valid only when specified
replacement parts and filters are used.
9
INSTALLATION
GENERAL
3600 RPM
2 x 8.4 HP (2 x 6.3 kW.)
230V, 3 Ph, 60 Hz
460V, 3 Ph, 60 Hz
575V, 3 Ph, 60 Hz
230V - 40A
460V - 20A
575V - 16.8A
3 X 6 + E, 3 X 2.5 + E mm
3.94 inches / 3.15 inches
(100 mm / 80 mm)
375 Lbs. (170 Kg)
75 dB(A)
58 psi (4 bar)
1/4" dim.
Polyester
107.64 ft
2
(10 m
C BIA
>99.9%
FAN
2x 4 STEPS RADIAL
470 CFM (800 m
3
23560 Pa
10,000 RPM
2
2
)
/h)
Advertisement
Table of Contents
