Configure The Moip Receivers - Binary B-900-MOIP-4K-CTRL Installation & Setup Manual

13. Configure the MoIP Receivers

1. For displays that only support 1080p and/or HDCP 1.4, set the corresponding receiver to
match this requirement to allow video to pass. 4K video input into transmitters will not
show on 1080p and/or HDCP 1.4 displays.
2. Set each receiver individual to
this will allow the HDR metadata to pass resulting in 4K HDR 30Hz.
3. Set each receiver to 2160p 30Hz to displays that are 4K however; do not support HDR.
Note:
• The video output resolution can be set to 2160p (4K) at 30Hz or 25Hz or 1080p (2K) at
60Hz or 50Hz.
• Since each receiver always outputs 4K 30Hz 4:4:4 8 bit color. 4K HDR will be limited to 8-bit
color only; however, the display will show content as 4K HDR and output higher brightness
and contrast.
Passthrough for the displays capable of support 4K HDR as
16