Verify Jumbo Frame; Setup The Moip Controller - Binary B-900-MOIP-4K-CTRL Installation & Setup Manual

3. Verify Jumbo Frame

Choose SETTINGS >
default value is 9216 (the maximum) and is acceptable.

4. Setup the MoIP Controller

MoIP controller
Claim
IMPORTANT: This is
1. For existing OvrC locations:
a. Log into OvrC and go to
b. A new device will show ready to add. Click "+ Device", > 'Media Devices' and follow the
prompts to claim the MoIP controller.
PORTS, then verify Jumbo Frame
on OvrC and access the local UI.
REQUIRED for firmware maintenance.
Customer>Devices
10
is set to greater than 8,000 Bytes. The