Martel LC-110 Reference Manual page 5

Find Quality Products Online at:
PE Ground
Hot Surface (Burn Hazard)
Read the User's Manual (Important Information)
Off
On
Canadian Standards Association
The following definitions apply to the terms "Warning" and "Caution".
• " Warning" identifies conditions and actions that may pose hazards
to the user.
• " Caution" identifies conditions and actions that may damage the
instrument being used.
Use the calibrator only as specified in this manual, otherwise injury
and damage to the calibrator may occur.
To avoid possible electric shock or personal injury:
• D o not apply more than the rated voltage. See specifications for
supported ranges.
• Follow all equipment safety procedures.
• N ever touch the probe to a voltage source when the test leads are
plugged into the current terminals.
• D o not use the calibrator if it is damaged. Before you use the
calibrator, inspect the case. Look for cracks or missing plastic. Pay
particular attention to the insulation surrounding the connectors.
• Select the proper function and range for your measurement.
• M ake sure the battery cover is closed and latched before you
operate the calibrator.
• R emove test leads from the calibrator before you open the battery
door.
GlobalTestSupply
www.
Warning
.com
3
sales@GlobalTestSupply.com