Martel LC-110 Reference Manual page 37

Find Quality Products Online at:
The ♥ symbol in the upper right corner flashes to indicate a working
HART connection.
The lower left corner contains the symbol  when additional screens
follow the present one, the symbol  when additional screens
precede the present one, and both when additional screens follow
and precede the present one.
Rotate the knob to move the reverse video highlight to the desired
storage position. Press the knob to select the storage position.
Press MENU/EXIT to return to the Log Select menu in section 6.10.
Once a storage position has been selected, the following menu is
displayed to select the operation to be performed.
Position: ♥
3 Tag
on two lines
SAVE
RECALL
ERASE
SEND
The ♥ symbol in the upper right corner flashes to indicate a working
HART connection.
The number and contents of the storage position are shown at the
top. The tag number is '<empty>' if the storage position is empty.
Rotate the knob to move the reverse video highlight to the desired
operation. Press the knob to perform the operation. Press MENU/
EXIT to return to the Log Select menu in section 6.10.
SAVE operation:
• I f the position is empty, save the present device configuration
data into the storage position.
• I f the position is in use, confirm that the existing data is to be
replaced with the present tag data before saving it into the
storage position.
RECALL operation:
• I f the position is empty, an error message is displayed.
• I f the position is in use, display the data in a sequence of
screens identical to the Device Data screen, section 6.6.
Return from those screens to this screen.
GlobalTestSupply
www.
35
.com
sales@GlobalTestSupply.com