Allen-Bradley CENTERLINE 2100 Installation Instructions Manual page 19

Table 2 - 2100 Units
Series Scope
Letter
V 2162Q, 2163Q,
2164Q, 2165Q
2162R, 2163R,
2164R, 2165R
2154H, 2155H
2154J, 2155J
2112, size 3, 4 and 5 Redesign to reduced space factor with Class J fuse clip
2162T, 2163T
2107, 2113, size 3
X 2162Q, 2163Q
All sizes
Y 2154J, 2155J, 108 A
and 135 A
2164Q, 2164R,
2165Q, 2165R
(Drive with manual
bypass)
2107, 2113, size 2
and 3
Z
(1) Replacement and renewal parts are no longer supported. For more information contact Rockwell Automation LV MCC Technical Support at 1.440.646.5800 and follow the prompts to Allen-Bradley >
Low Voltage Motor Control Centers > Post Shipment Support.
Table 3 - 2400 Units
Series Scope
Letter
A —
B 18A, 24A, 30A
C 18A, 24A, 30A
D All sizes
16A-85A
Description of Change
®
Redesign of 240-480V PowerFlex 70 and release of 600V PowerFlex 70
Original release of PowerFlex 700
Original release of SMC™-3
Original release of SMC Flex
Original release of PowerFlex 40
Reduced space factor
Reduced space factor, changed CCT with integral fuses
800F pilot devices
Redesign to change units from frame mounted to plug-in
Redesign for change from SMP overload relay to E1Plus overload relay
Redesign due to starter component series letter change
Changed to Bulletin 140G and 140MG circuit breakers.
Description of Change
Original design
Changed to series B, Bulletin 194R, 30 A disconnect
Changed to three Bulletin 800E pilot devices on 0.5 space factor units
New disconnect external auxiliary contacts and new 600 A...1200 A circuit breaker operating mechanism
Original design of units with a Bulletin 100-C contactor
Rockwell Automation Publication 2100-IN012G-EN-P - August 2016
General Information Chapter 1
Date Implemented in
U.S.
April 2002
July 2002
November 2002
April 2004
April 2004
September 2004
April 2005
April 2005
August 2005
March 2006
August 2006
December 2009
December 2013
Date Implemented
in U.S.
June 1990
March 1992
July 1992
February 1996
September 1999
19