Advertisement
CANVAS INSTALLATION INSTRUCTIONS
Thank you for buying RAB lighting fixtures. Our goal is to design the best quality products to get the job done right. We'd like to hear your comments.
Call the Marketing Department at 888-RAB-1000 or email: marketing@rabweb.com
GUARD OR SHIELD INSTALLATION
Wire Guard and Poly Shield mount with (4) #8-32
Stainless Steel Screws. Screws are provided with the
accessory. Guard and shield may be used together. See
figure 1 for Guard. See figure 2 for Shield
1. Line up guard or shield with existing pre-drilled holes in
frame as shown, tighten screws.
Figure 1
Figure 2
ACCESSORIES
Chrome Wire Guard:
Poly Shield:
Lens & Door Replacement:
CANVAS78 6Hx4V Cool
©2014 RAB LIGHTING Inc.
Northvale, New Jersey 07647 USA
CANVAS-IN-1014
GDEZLED78W
GDEZLED78P
LCANVAS78 (bronze)
LCANVAS78W (white)
CANVAS78N 6H x 4V Neutral
Easy Installation & Product Help
Tech Help Line
Call our experts 888 RAB-1000
TROUBLESHOOTING
1. Check that the line voltage at the fixture is correct. Refer
to wiring directions.
2. Is the fixture grounded properly?
3. Is the photocell, if used, functioning properly?
CLEANING & MAINTENANCE
Stainless Steel
CAUTION: Be sure fixture temperature is cool enough
Screws (4)
to touch. Do not clean or maintain while fixture is
energized.
1. Clean glass lens with non-abrasive glass cleaning
Stainless Steel
solution.
Screws (4)
2. Do not open the fixture to clean the LED. Do not touch
the LED.
US: pat. D679,856; MX: 40069; CA; CN; TW: pat pending;
Note: These instructions do not cover all details or variations in
equipment nor do they provide for every possible situation during
installation, operation or maintenance.
rabweb.com
Visit our website for product info
CANVAS78Y 6H x 4V Warm
email
Answered promptly sales@rabweb.com
Advertisement
