Anybus CompactCom Reference Manual page 16

Description
3.4.1 External Power Connector (JP25)
Details
The connector can be used to power the Anybus
CompactCom module from en external power source.
The board has no on board power regulation, i.e. it is
required to use a regulated 3.3 VDC power source as
specified by the Anybus CompactCom M40/M30
Hardware Design Guide.
®
Anybus CompactCom Starter Kit Reference Guide
Exceeding the specified voltage WILL cause irreparable damage to the Anybus
CompactCom and/or the host application.
Connector (Male)
14 (20)
HMSI-27-224 2.0