BMW 11 12 2 157 664 Installation Instructions Manual page 31

16. Concluding work and coding
The retrofit system requires coding.
- Connect the battery.
- Fill and bleed the coolant system as directed and check the coolant system for leaks
(see ISTA 17 00 005).
Requesting the release code
- Remove the release code certificate L from the red envelope.
- Log into the ASAP portal.
- On the "Service/Technology" page, open the "Sweeping Technologies" menu and menu item "Request Tuning
Kit FSC".
- In the "Chassis number" field, enter the last seven digits of the chassis number.
- In the "SN" field, enter the serial number and in the "Key" field enter the alphanumeric combination from the
activation code certificate.
Be aware that your entries are case-sensitive.
If you enter the data incorrectly 10 times, the certificate will be blocked.
- Then click the "Request" button. Once the activation code has been generated, you will automatically be
forwarded to the "Download activation codes" area.
- Store the activation code on a suitable medium and keep it handy for the programming process.
Programming/coding
The retrofit must be carried out with ISSS (use the latest software version!)
- Connect the car with the ISSS using ICOM. Vehicle identification begins automatically.
- Confirm the control unit replacement with "No".
- After identification, switch to the "Vehicle" menu and then select the tab "Conversions".
- Select the conversion performed and click "Determine action plan" below.
- Select "Accept action plan".
- Then follow the instructions.
- After programming, carry out a vehicle test and observe the instructions in the follow-on work list.
If the action "Disable DME/DDE" action should appear in the concluding report, always change the terminals.
After changing the terminals, continue with the standard diagnostic process (continue with the car test) and
delete any error memory entries. You must ensure that no error memory entries are still present.
- On E92/E93 LCI cars with M bumper and fog light, the NSW function must also be disabled via ISSS.
- Re-assemble the car.
Workshop certificate
Print out the "Workshop certificate" section at the end of the installation instructions, fill it in and give it to the
customer.
© BMW AG, Munich. 01 29 2 160 471



2/2011 (Z/Z) 31