Troubleshooting - Windsor Presto 3 Operating Instructions Manual

Maintenance

Troubleshooting

PROBLEM
Little or no solution flow
Loss of vacuum/Solu-
tion recovery
16
CAUSE
Clogged spray jet on cleaning tool
Faulty pump
Incorrectly attached solution hose
Incorrectly attached vacuum hose
Obstruction in cleaning tool
Recovery tank is not securely
mounted on the solution tank
86401000 Operator's Manual - Spotter / Mini Extractor
SOLUTION
Remove and clean jets
Check and replace pump
Ensure solution hose coupler is securely
attached to the coupler on the solution
tank
Ensure Vacuum hose is pushed com-
pletely onto the recovery tank inlet.
Inspect for and remove any debris.
Tighten latch on either end of the machine