Applications Manual
14.3 ZS Sensor Dimensions
Fig. 7 ZS Sensor Dimensions
Bosch Thermotechnology Corp.
14.4 ZS Sensor Features
The FHP ZS Combo Sensors are thermistor-based, communicating temperature sensors that may optionally sense humidity or CO₂. The ZS
Sensors are fi eld installed and are wired to the Rnet port of the FHP560 controller. A maximum of 5 ZS sensors may be daisy-chained and used for
applications where multiple readings for temperature, humidity or CO₂ are required.
Fig. 8 ZS Standard
Fig. 9 ZS Plus
Fig. 10 ZS Pro
Page____ of ____
FHP560 Controller | 37
ZS Standard
Features:
• Local access port
• No user control
Available in:
• Temperature only -
8733933902
• Temperature with Humidity -
8733933903
ZS Plus
Features:
• Slide potentiometer to make the zone warmer or cooler
•
button to override the schedule and put the zone in an
occupied state, or force the zone to an unoccupied state
Slide
• Green LED to indicate occupied state
• Local access port
Available in:
• Temperature only
-
8733933901
NOTE:
Slide the sensor's potentiometer up to make the zone
warmer or down to make it cooler. The control program
determines how much you can adjust the setpoint.
ZS Pro
Features:
• LCD display
•
button to override the schedule and put the zone in an
occupied state, or force the zone to an unoccupied state
•
and
buttons to change any editable property, such as
the temperature or humidity setpoint.
•
button to cycle through information defined in the
control program.
• Green LED to indicate occupied state
• Local access port
Available in:
• Temperature only
-
• Temperature with Humidity
-
• Temperature with Humidity and CO₂
-
Data subject to change
8733933898
8733933899
8733933900