How To Reset Error Codes; History Of Error Codes And Warnings - Daikin EDLQO5CAV3 Service Manual

ESIE15-08B | Part 2. Troubleshooting
If an error is present, it will immediately be displayed on the user interface screen: for more information about troubleshooting, refer
to "Error code based troubleshooting" on page

1.2. How to reset error codes

When the problem is solved, you can reset the error by pushing the OK-button unless otherwise mentioned on the screen.
I
NFORMATION
For U3 error for example, you need to be in installer mode to reset.

1.3. History of error codes and warnings

The (history of) error codes can be retrieved through the indoor unit (user interface).
The user interface can remember up to 20 error codes.
They are split up in an error history list (which only lists errors) and a warning history list (which lists warnings and some
cautions). Both lists are always visible when in installer level. End user + will only see error history in case the error occurs so
he can inform the installer, first level of end user cannot see the history.
They can be found on the following location:
[6] Information
Sensor information
Energy metering
Error handling
User permission level
Actuators
Operation modes
Running hours
Version
Page 18
Daikin Altherma Monobloc CA
19.
[6.2] Energy metering
Consumed elec.
Produced energy
[6.3] Error information
Error history
Contact/helpdesk number
Warning history
1. Error codes
19/07/16